You are using a version of the website built for webcrawlers and people whose devices cannot use javascript. Some functionality may not be available.
Contents (2011 - 674)
Skip contents
Work Health and Safety Regulation 2011
Repealed version for 1 July 2017 to 31 August 2017 (accessed 22 September 2017 at 20:07)
158   Preliminary steps
(1)  A person conducting a business or undertaking must ensure the following before electrical work on energised electrical equipment commences:
(a)  a risk assessment is conducted in relation to the proposed electrical work,
(b)  the area where the electrical work is to be carried out is clear of obstructions so as to allow for easy access and exit,
(c)  the point at which the electrical equipment can be disconnected or isolated from its electricity supply is:
(i)  clearly marked or labelled, and
(ii)  clear of obstructions so as to allow for easy access and exit by the worker who is to carry out the electrical work or any other competent person, and
(iii)  capable of being operated quickly,
(d)  the person authorises the electrical work after consulting with the person with management or control of the workplace.
Maximum penalty:
(a)  in the case of an individual—$6,000, or
(b)  in the case of a body corporate—$30,000.
(2)  For the purposes of subclause (1) (a), the risk assessment must be:
(a)  conducted by a competent person, and
(b)  recorded.
Note.
 Clause 12 permits risk assessments to be conducted, in certain circumstances, in relation to a class of hazards, tasks, things or circumstances.
(3)  Subclause (1) (c) does not apply to electrical work on electrical equipment if:
(a)  the work is to be carried out on the supply side of the main switch on the main switchboard for the equipment, and
(b)  the point at which the equipment can be disconnected from its electricity supply is not reasonably accessible from the work location.