Environmental Planning and Assessment Regulation 2000
Historical version for 28 April 2006 to 30 April 2006 (accessed 13 July 2020 at 03:07) Current version
Part 7 Division 2A
Division 2A Conditions of complying development certificate
136A   Compliance with Building Code of Australia and insurance requirements under the Home Building Act 1989
(cf clauses 78 and 78A of EP&A Regulation 1994)
(1)  A complying development certificate for development that involves any building work must be issued subject to the following conditions:
(a)  that the work must be carried out in accordance with the requirements of the Building Code of Australia,
(b)  in the case of residential building work for which the Home Building Act 1989 requires there to be a contract of insurance in force in accordance with Part 6 of that Act, that such a contract of insurance must be entered into and be in force before any building work authorised to be carried out by the certificate commences.
(2)  This clause does not limit any other conditions to which a complying development certificate may be subject, as referred to in section 85A (6) (a) of the Act.
(3)  This clause does not apply:
(a)  to the extent to which an exemption is in force under clause 187 or 188, subject to the terms of any condition or requirement referred to in clause 187 (6) or 188 (4), or
(b)  to the erection of a temporary building.
(4)  In this clause, a reference to the Building Code of Australia is a reference to that Code as in force on the date the application for the relevant complying development certificate is made.
136B   Erection of signs
(1)  A complying development certificate for development that involves any building work, subdivision work or demolition work must be issued subject to a condition that the requirements of subclauses (2) and (3) are complied with.
(2)  A sign must be erected in a prominent position on any site on which building work, subdivision work or demolition work is being carried out:
(a)  showing the name, address and telephone number of the principal certifying authority for the work, and
(b)  showing the name of the principal contractor (if any) for any building work and a telephone number on which that person may be contacted outside working hours, and
(c)  stating that unauthorised entry to the site is prohibited.
(3)  Any such sign is to be maintained while the building work, subdivision work or demolition work is being carried out, but must be removed when the work has been completed.
(4)  This clause does not apply in relation to building work, subdivision work or demolition work that is carried out inside an existing building, that does not affect the external walls of the building.
(5)  This clause does not apply in relation to Crown building work that is certified, in accordance with section 116G of the Act, to comply with the technical provisions of the State’s building laws.
(6)  This clause applies to a complying development certificate issued before 1 July 2004 only if the building work, subdivision work or demolition work involved had not been commenced by that date.
Note.
 Principal certifying authorities and principal contractors must also ensure that signs required by this clause are erected and maintained (see clause 227A which currently imposes a maximum penalty of $1,100).
136C   Notification of Home Building Act 1989 requirements
(1)  A complying development certificate for development that involves any residential building work within the meaning of the Home Building Act 1989 must be issued subject to a condition that the work is carried out in accordance with the requirements of this clause.
(2)  Residential building work within the meaning of the Home Building Act 1989 must not be carried out unless the principal certifying authority for the development to which the work relates (not being the council) has given the council written notice of the following information:
(a)  in the case of work for which a principal contractor is required to be appointed:
(i)  the name and licence number of the principal contractor, and
(ii)  the name of the insurer by which the work is insured under Part 6 of that Act,
(b)  in the case of work to be done by an owner-builder:
(i)  the name of the owner-builder, and
(ii)  if the owner-builder is required to hold an owner-builder permit under that Act, the number of the owner-builder permit.
(3)  If arrangements for doing the residential building work are changed while the work is in progress so that the information notified under subclause (2) becomes out of date, further work must not be carried out unless the principal certifying authority for the development to which the work relates (not being the council) has given the council written notice of the updated information.
(4)  This clause does not apply in relation to Crown building work that is certified, in accordance with section 116G of the Act, to comply with the technical provisions of the State’s building laws.
136D   Fulfilment of BASIX commitments
(1)  This clause applies:
(a)  on and from 1 July 2004, to all land within the initial BASIX area, and
(b)  on and from 1 July 2005, to all land within New South Wales.
(2)  This clause applies to all development:
(a)  that involves the erection (but not the alteration, enlargement, extension or relocation) of a BASIX affected building, or
(b)  that involves a change of building use by which a building becomes a BASIX affected building.
(3)  A complying development certificate for development to which this clause applies must be issued subject to a condition that the commitments listed in the relevant BASIX certificate for the development must be fulfilled.