Environmental Planning and Assessment Regulation 2000
Historical version for 28 April 2006 to 30 April 2006 (accessed 13 July 2020 at 03:30) Current version
Part 12
Part 12 Accreditation of components, processes and designs
224   Components, processes and designs certified under the Australian Building Products and Systems Certification Scheme
(1)  For the purposes of sections 79C (4), 85A (4) and 109F (2) of the Act, a component, process or design is accredited if and only if a certificate of conformity issued in accordance with the ABCB scheme is in force with respect to the component, process or design.
(2)  Subclause (1) does not apply if the certificate of conformity is limited in its application to jurisdictions outside New South Wales.
(3)  In this clause, ABCB scheme means the Australian Building Products and Systems Certification Scheme administered by the Australian Building Codes Board.
225   Transitional provisions
(1)  Any application under clause 81GG or 81KK of the Environmental Planning and Assessment Regulation 1994, as in force immediately before 1 January 2001, is to be determined in accordance with Part 7E of that Regulation, as then in force, as if that Regulation had not been repealed.
(2)  Subject to subclause (4), any component, process or design:
(a)  that, immediately before 1 January 2001, was accredited under Part 7E of the Environmental Planning and Assessment Regulation 1994, as then in force, or
(b)  that is accredited, or has its accreditation extended, under subclause (1),
is taken to be accredited under this Part.
(3)  In the case of a component, process or design accredited for a limited period of time, accreditation under this clause ceases to have effect at the end of that period unless it is sooner revoked under subclause (4).
(4)  The Director-General may at any time, by order published in the Gazette, revoke the accreditation under this clause of any component, process or design.