You are using a version of the website built for webcrawlers and people whose devices cannot use javascript. Some functionality may not be available.
Contents (2011 - 640)
Skip contents
Bogan Local Environmental Plan 2011
Current version for 5 August 2016 to date (accessed 16 August 2017 at 23:27)
Part 3
Part 3 Exempt and complying development
3.1   Exempt development
Note.
 Under section 76 of the Act, exempt development may be carried out without the need for development consent under Part 4 of the Act or for assessment under Part 5 of the Act.
The section states that exempt development:
(a)  must be of minimal environmental impact, and
(b)  cannot be carried out in critical habitat of an endangered species, population or ecological community (identified under the Threatened Species Conservation Act 1995 or the Fisheries Management Act 1994), and
(c)  cannot be carried out in a wilderness area (identified under the Wilderness Act 1987).
(1)  The objective of this clause is to identify development of minimal environmental impact as exempt development.
(2)  Development specified in Schedule 2 that meets the standards for the development contained in that Schedule and that complies with the requirements of this Part is exempt development.
(3)  To be exempt development, the development:
(a)  must meet the relevant deemed-to-satisfy provisions of the Building Code of Australia or, if there are no such relevant provisions, must be structurally adequate, and
(b)  must not, if it relates to an existing building, cause the building to contravene the Building Code of Australia, and
(c)  must not be designated development, and
(d)  must not be carried out on land that comprises, or on which there is, an item that is listed on the State Heritage Register under the Heritage Act 1977 or that is subject to an interim heritage order under the Heritage Act 1977.
(4)  Development that relates to an existing building that is classified under the Building Code of Australia as class 1b or class 2–9 is exempt development only if:
(a)  the building has a current fire safety certificate or fire safety statement, or
(b)  no fire safety measures are currently implemented, required or proposed for the building.
(5)  To be exempt development, the development must:
(a)  be installed in accordance with the manufacturer’s specifications, if applicable, and
(b)  not involve the removal or pruning of a tree or other vegetation that requires a permit or development consent for removal or pruning, unless that removal or pruning is undertaken in accordance with a permit or development consent.
Note.
 A permit for the removal or pruning of a tree or other vegetation may be granted under this Plan. A development consent for the removal of native vegetation may be granted where relevant under the Native Vegetation Act 2003.
(6)  A heading to an item in Schedule 2 is part of that Schedule.
3.2   Complying development
(1)  The objective of this clause is to identify development as complying development.
(2)  Development specified in Part 1 of Schedule 3 that is carried out in compliance with:
(a)  the development standards specified in relation to that development, and
(b)  the requirements of this Part,
is complying development.
Note.
 See also clause 5.8 (3) which provides that the conversion of fire alarms is complying development in certain circumstances.
(3)  To be complying development, the development must:
(a)  be permissible, with development consent, in the zone in which it is carried out, and
(b)  meet the relevant deemed-to-satisfy provisions of the Building Code of Australia, and
(c)  have an approval, if required by the Local Government Act 1993, from the Council for an on-site effluent disposal system if the development is undertaken on unsewered land.
(4)  A complying development certificate for development specified in Part 1 of Schedule 3 is subject to the conditions (if any) set out or referred to in Part 2 of that Schedule.
(5)  A heading to an item in Schedule 3 is part of that Schedule.
3.3   Environmentally sensitive areas excluded
(1)  Exempt or complying development must not be carried out on any environmentally sensitive area for exempt or complying development.
(2)  For the purposes of this clause:
environmentally sensitive area for exempt or complying development means any of the following:
(a)  the coastal waters of the State,
(b)  a coastal lake,
(d)  land reserved as an aquatic reserve under the Fisheries Management Act 1994 or as a marine park under the Marine Parks Act 1997,
(e)  land within a wetland of international significance declared under the Ramsar Convention on Wetlands or within a World heritage area declared under the World Heritage Convention,
(f)  land within 100 metres of land to which paragraph (c), (d) or (e) applies,
(g)  land identified in this or any other environmental planning instrument as being of high Aboriginal cultural significance or high biodiversity significance,
(h)  land reserved under the National Parks and Wildlife Act 1974 or land acquired under Part 11 of that Act,
(i)  land reserved or dedicated under the Crown Lands Act 1989 for the preservation of flora, fauna, geological formations or for other environmental protection purposes,
(j)  land identified as being critical habitat under the Threatened Species Conservation Act 1995 or Part 7A of the Fisheries Management Act 1994.