2.6B   Development standards

(1)  The standards specified for that development are that the development must:

(a)  be for domestic purposes only, and

(b)  not have a floor area of more than 10m², and

(c)  be not higher than 1.8m above ground level (existing), and

(d)  if it is not on land in Zone RU1, RU2, RU3 or RU4—be located behind the building line of any road frontage, and

(e)  be located at least 450mm from each side and rear boundary, and

(f)  if roofed—be constructed or installed so that roofwater is disposed of into an existing stormwater drainage system, and

(g)  to the extent it is comprised of metal components—be constructed of low reflective, factory pre-coloured materials and have an impervious floor, and

(h)  if it is located on bush fire prone land and is less than 5m from a dwelling—be constructed of non-combustible material, and

(i)  if it is constructed or installed in, or in relation to, a heritage item or a draft heritage item, or in a heritage conservation area or a draft heritage conservation area—be located in the rear yard.

(2)  There must not be more than 2 developments per lot.